Our Product Line includes New and Used Sheet Metal
Equipment from these manufacturers:
Morlin, Duro Dyne, Proformer, Jet, Tin Knocker, Berry Duct Notchers, Malco Tools, Kett Shears, and Wiss Tools.
The Sheet Metal Equipment on this page are preowned and used.
Visit our NEW Sheet Metal Machinery Page for
more equipment
or shop online for Hand Tools.
Products shipped only to Lower 48 U.S. states.
ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE AND DO
NOT INCLUDE FREIGHT OR TAXES
Prices listed may not include sale or special pricing
on selected equipment.
Please, check out the special pricing on the Special
Of the Month page.

Manufacturer: Tin Knocker Sheet Metal Fabrication Equipment Tinknocker
Item: TIN KNOCKER 20 ga Button Lock Roll Former Machine DEMO 3 Phase
Description: TINKNOCKER 20 ga button lock is a 9 station machine. Comes with Male tooling on one side and female on the opposing side. Motor 3HP 230/3/60. Capacity 20-26 gauge mild sheet metal. Approx speed 60 FPM. Weight 820 lbs. Sheet metal forming machines.
DEMO MACHINE
FREE SHIPPING
3 PHASE MACHINE ONLY
Item Number: TINKNOCKER TK 20 ga Button Lock Roll Former DEMO
Price: $6,995.00

Sale Price: $5,295.00
Sale Expires:
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Tin Knocker Sheet Metal Fabrication Equipment Tinknocker
Item: TIN KNOCKER TK24 24 gauge Pittsburgh Machine Roll Former Sheet Metal Shop Equipment
Description:
*WHY BUY USED WHEN YOU CAN BUY NEW WITH A WARRANTY AND FREE PITTSBURGH STAND AND FREE SHIPPING
TINKNOCKER TK24 24 gauge portable pittsburgh machine. powered by 1/2HP 1725 RPM V-belt 115V 1ph. Dimensions: 41"x24"x33" and 274lbs. Optional flanger $695.00 and Stand $150.00. Sheet metal fabrication equipment.
FREE SHIPPING
*FREE PITTSBURGH STAND
Item Number: TIN KNOCKER TK24 24 ga Pittsburgh Machine Sheet metal Machinery
Price: $1,995.00

Sale Price: $1,895.00
Sale Expires: 0/00
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Lockformer
Item: Used Lockformer 24 gauge Snap Lock Machine also called a 24 ga. Button Lock Machine
Description:
SOLD
Used Lockformer 24 gauge Snap Lock Machine also called a 24 ga. Button Lock Machine. This 24 ga. Snaplock machine has been rebuilt and gone through. New needle bearings, belts, Cabinet sand blasted and painted.
FREE SHIPPING
SHIPPING TO THE LOWER 48 STATES TO A COMMERCIAL ADDRESS WITH AWAY TO UNLOAD, THIS ITEM SHIPS TRUCK FREIGHT ONLY
Item Number: Used Lockformer 24 gauge Snap Lock Machine also called a 24 ga. Button Lock Machine
Price: $6,900.00
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Tin Knocker Sheet Metal Fabrication Equipment Tinknocker
Item: Tin Knocker TK Manual Hand Flanger Sheet Metal Easy Edge Tool
Description: Tin Knocker TK Manual Hand Flanger. Flange Height: 7/32". Capacity: 20 gauge mild steel. Bench Mounted. There is no gauge to set and requies no special tools. Used to make flange on sheet metal elbows and other radius fittings. Shipping weight: 35 lbs. Sheet metal specialty machine
Item Number: TinKnocker TK Manual Hand Flanger
Price: $475.00
|

Manufacturer: Birmingham Sheet Metal Machines
Item: Birmingham DEMO X3622C 36 inch 22ga Slip Roll
Description: DEMO Birmingham X3622C 36 inch 22 gauge Manual Slip Roll. Max width: 36". Capacity: 22 gauge mild steel and 26 gauge stainless steel. 3 rolls 2 inch diameter. 3 wire grooves. Top roll lifts out for easy removal of formed material. Approx shipping weight 290 pounds. Imported. Sheet metal specialty roll forming machine.
SOLD
Item Number: Birmingham DEMO X3622C 36 inch 22ga Slip Roll
Price: $500.00
Shipping Cost: $120.00
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Birmingham Sheet Metal Machines
Item: Birmingham X5016C 50 inch 16 ga Manual Slip Roll DEMO
Description: Birmingham X5016C 50 inch 16 ga Manual Slip Roll DEMO. This is a DEMO machine. Like NEW but has some minor scratches on paint and minor surface rust on rolls. Max width: 50". Capacity: 16 gauge mild steel and 20 gauge stainless steel. 3 rolls 3 inch diameter. 3 wire grooves. Top roll slides out for easy removal of formed material. Approx shipping weight 540 pounds. Imported. Sheet metal roll forming machinery.
sold
Item Number: Birmingham X5016C 50 inch 16 ga Manual Slip Roll DEMO
Price: $1,055.00
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Duro Dyne Hand Tools HVAC Sheet Metal
Item: Duro Dyne 27004 Model LF 2000 220 volt Hand Held Pinspotter DEMO
Description: Duro Dyne 27004 Model LF 2000 220 volt Hand Held Pinspotter DEMO. Like new, but has some very minor scratches on case. Current Draw: 220 Volt: 7.5 amp average; 12.5 amp peak. Built in solid state timer. 8 ft. power cable. Extra welding tip. High impact plastic carrying case. For use on 18 gauge or lighter steel. Weight: 9 lbs.For use with PN Pins with PC or NC washers.
SOLD
Item Number: Duro Dyne 27004 Model LF 2000 220 volt Hand Held Pinspotter DEMO
Price: $838.00
|
Picture Not Available

Manufacturer: Roper Whitney
Item: Roper Whitney 4 ft 22 ga. straight brake
Description: Used Roper Whitney 4 foot 22 ga. brake model 422 serial number 852-11-91 SOLD.
Item Number: Used Roper Whitney 4 ft 22 ga. brake
Price: $490.00
|

Manufacturer: Jet Tools and Metal Working Equipment
Item: USED Jet HB1697 8 ft 16 ga Straight Brake
Description: USED LESS THAN 1 YEAR OLD! CUSTOMER WENT OUT OF BUSINESS! Jet HB1697 straight brake 8 Foot 16 gauge straight floor model brake. Suitable for many types of metal forming operations. All body sections are welded steel plate. Quick clamping adjustment is achieved by means of a simple link arrangement. Wide range of adjustment permits clamping of form and nose bars for special shapes. Maximum Bending capacity 16 gauge mild steel and 20 gauge stainless steel. Maximum lift of Beam 2-1/4". Bending length capacity 97". Overall Dimensions 120"x31"x57". Net weight 2290 lbs. Sheet metal forming and bending machines.
SOLD
Item Number: USED Jet HB1697 8 ft 16 ga Straight Brake
Price: $2,995.00
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Lockformer
Item: Used Lockformer 18 ga Pittsburgh Machine with Double Seam Rolls
Description: Used (Rebuilt) Lockformer 18 ga Pittsburgh Machine with Double Seam Rolls (pipe lock rolls). Capacity 18-22 ga. All new bearings. New 3hp Baldor motor. 220 volt single phase. New motor pulley and belts. New grease fittings and copper tubing. New opening roll (opening wheel). New manual magnetic starter switch. New Belleville washers. New drop cord with plug. All rolls have been cleaned. Cabinet has been sand blasted and painted. Machine is in very good condition. SOLD.
Item Number: Used Lockformer 18 ga Pittsburgh Machine with Double Seam Rolls
Price: $5,200.00
Shipping Cost: $300.00
SHIPPING ONLY TO THE LOWER 48
STATES. TRUCK FREIGHT TO A COMMERCIAL LOCATION WITH A WAY TO UNLOAD
|

Manufacturer: Lockformer
Item: Used Lockformer 22 ga. Pittsburgh Machine.
Description: Used Lockformer 22 gauge Pittsburgh machine. This Pittsburg machine has been rebuilt. New bearings, motor, belt, opening roll, Paint, Bellville spring washers, switch and cord. This Pittsburgh machine is ready to work. Add a new Tinknocker Flanger for radius duct elbows for $695.00
SOLD
Item Number: Used Lockformer 22 ga. pittsburgh machine
Price: $2,800.00
|

Manufacturer: Lockformer
Item: Used Lockformer 24 ga. Pittsburgh Machine
Description: Used Lockformer 24 gauge Pittsburgh machine. This Pittsburg machine has been rebuilt. New bearings, motor, belt, opening roll, Paint, switch and cord. This Pittsburgh machine is ready to work.
SOLD
Item Number: Used Lockformer 24 ga. Pittsburgh Machine
Price: $2,300.00
|
Picture Not Available

Manufacturer: Lockformer
Item: Used Lockformer Easy Edger Flanger for duct elbows
Description: Used Lockformer Easy Edger manual flanger for duct elbows. 20 ga. capacity. Turns a 7/32" flange for both inside and outside radius. SOLD.
Item Number: Lockformer Easy Edger
Price: $475.00
|
Picture Not Available

Manufacturer: Tennsmith
Item: Used Tennsmith 4 ft 16 ga. straight brake with stand
Description: Used Tennsmith 4 foot 16 ga. straight brake with stand. In good working condition
SOLD
Item Number: Tennsmith 4 ft 16 ga brake
Price: $900.00
|
Picture Not Available

Manufacturer: Whitney
Item: Used Whitney 4 foot 22 ga. straight brake with stand
Description: Used Whitney 4 foot 22 ga. straight brake with stand. This one is a good old brake. SOLD.
Item Number: Used Whitney 4 ft 22 ga. brake
Price: $400.00
|